Benyi Tablet PC is a very portable tablet PC. Its screen is seven inches and its resolution is About 800*400. In terms of hardware, the Benyi tablet uses the Android system. At the same time, it also has 128MB of memory and 8G of space storage. These features are liked by countless consumers. While they like them, it is because of long-term use that the Yi tablet needs to be flashed. Next, let the editor tell you how to flash the Yiping computer!

Preparation for flashing:

1. To flash the Benyi tablet, you first need to prepare a computer. The best system is xp system or win7 system.

　2. The power of Benyi tablet must exceed 50%.

　3. Connect the tablet to the prepared computer and close all anti-virus software.

　4. Prepare the firmware package.

Flashing steps:

1. Unzip the firmware package you just downloaded on your computer desktop.

　2. Then, double-click the extracted file, click "Next" in the pop-up window, then click "Browse" and put the file into C Within the plate. At this time, the computer will still pop up a new window, click the "Next" button to install the driver.

　3. Computer promptsYou are "Installing software for this hardware." When you see this, click "Install anyway" and then click "Finish." After the program software is installed successfully, a green shortcut icon will appear on the computer desktop.

4. While running the upgrade tool, we need to refresh the firmware!

5. Click on the software just generated, named PhoenixSuit! Double-click PhoenixSuit, and the software running interface will pop up. If a small window pops up for you to update, you can just close it at this time without clicking to upgrade.

6. In the upper middle of the software page, we will see the "One-click Flash" button. At this time, you need to click "Browse" in the middle. , and then select the firmware package we downloaded before. The suffix name must end with img. This format is correct.

7. Turn off your Benyi tablet, then press the home button on the tablet without moving. Plug the USB interface into the Benyi tablet and connect it to the computer.

　8. Then click the power button five or six times.

9. When yourWhen the computer displays a new hardware prompt, release the Home button.

10. Click the "Next" button in the prompt, and then click "Finish."

　11. At this time, we will see a "Flash Now" button appearing on the homepage of the software, press it.

　12. After the flashing is completed, click "OK".

Flashing a phone is a very simple task that does not allow for mistakes. , before we flash the phone, it is best to back up the previous data for our Benyi tablet. If there is a TF card in the Benyi tablet, we must pull it out. Of course, you must read the manual of your Benyi tablet in detail before flashing to avoid damage to the tablet due to improper operation. If flashing fails, be sure to unplug the USB cable in advance and force the tablet to shut down! The above is what the editor has brought to you this time.