Toshiba l332 product introduction and disassembly tutorial

People a long time ago couldn’t imagine that humans could fly into the sky, or that they could have a phone call or even video chat with someone far away in just a few seconds; but now, people can’t imagine going out without bringing them with you. Mobile phone, computer cannot connect to the Internet, etc. All these changes are due to the emergence of technology, which has greatly improved people's daily lives. Next, the editor will introduce to you a laptop computer - Toshiba l332. The product introduction and disassembly tutorial of this Toshiba l332 will be explained below.

Toshiba L332 product introduction

The body size of Toshiba L332 is 334×242×32.7-37.5mm, and the body weight is 2.3Kg. It comes with a 14.1-inch WXGA wide screen with a resolution of 1280×800. Toshiba L332 provides the following body interfaces: 2 USB2.0 interfaces, e-SATA/USB hybrid interface, IEEE1394 interface, VGA interface, RJ-45 interface, 1 set of audio input/output ports, ExpressCard slot and card reader . In terms of network, Toshiba L332 has a built-in 10/100M Ethernet card and is equipped with an 802.11g wireless network card. In terms of battery life, it is powered by a 6-cell lithium battery, with an official nominal battery life of up to 3 hours.

Toshiba l332 disassembly tutorial

1. Remove the three screws of the hard disk protective cover and the three screws of the memory protective cover Screws;

2. Remove the hard drive (pull it out to the outside to remove);

3. Remove the screws from the bottom cover frame, and sort the screws together according to their numbers. , to facilitate future installation;

4. Next is the memory area. After removing the screws of the optical drive, use a screwdriver to push the optical drive side and take out the optical drive;

5. Unplug the red and black cables and the wireless network card Two antennas, and then unplug the black cable under the upper optical drive screw;

6. Turn the laptop over and prepare to remove the keyboard. Pay attention to the thin black strip above the keyboard. When removing it, gently lift it. There are buckles on both sides. After loosening, lift the left part toward the middle, then remove the left buckle, and then twitch to the left. The buckle on the right side is removed, and the entire decorative strip is removed intact;

7. Pay attention to the two white screws on the F1 and INS buttons. These two screws are used to fix the keyboard. Unscrew them. After unscrewing the screws, pull the keyboard forward and lift it up to remove the keyboard. Be careful not to pick up the keyboard directly;

8. Remove all the screws marked with arrows on the panel. Put it together, unscrew the screws, and prepare to remove a few cables. Remove the four wires, be careful to do it gently when removing the blue and white wires;

9. Remove all the screws marked with white arrows on the motherboard, including the screw in the upper left corner of the motherboard. Although there is no white arrow;

10. The disassembly is completed.

Toshiba l332 market quotation

The current market quotation of Toshiba l332 is 4299 yuan. (The price comes from the Internet and is for reference only)

When it comes to computers, people usually think of Lenovo for example. , Dell and other old brands, or more well-known brands such as Apple and Samsung. Although Toshiba is not as famous as the first two, the brand has been diligently conducting technology research and development. Through the above editor’s introduction and disassembly of Toshiba l332 Machine tutorials and market quotationsFrom the relevant introductions made for everyone, we can see that the Toshiba L332 is a very cost-effective computer. The simple and easy-to-use disassembly tutorial can also help you fix some computer problems, and it is worth buying.